High speed pavement scanning
The Synergy Road Scanning System can quickly scan pavements and generate a model of the existing surface, allowing the creation of a design to meet smoothness expectations. Application of this design data through the PavesSmart system ensures material management stays within acceptable yields, reduces the number of lifts required to reach finished design and maximizes productivity.
Eliminate lane closures
It is capable of scanning miles of road in a short time, without the need for costly lane closures or re-work. With this revolutionary solution, normal traffic conditions continue uninterrupted – dramatically saving time, eliminating the need to close lanes, and increasing the safety of your crew.
Sophisticated sensors suite
The sophisticated system works with Lidar scan data, GPS as well as an Inertial Measurement Unit (IMU) to accurately capture detailed point data while traveling at normal highway speeds.
Specialists in complex design
Our team are specialists in complex design situations with difficult parameters. Over the years we’ve worked on numerous design projects where existing structures need to tie in with new construction. Projects range from parking lots with multiple drains and complex shapes, airport taxiways with multiple light posts, to numerous sites where a new surface needs to tie into existing pavement with seamless cross fall and camber.
Our proven technology and experienced PaveSmart technicians combine to bring you a full in-house design service utilizing our survey profilograph system, high speed road scanning system or our traditional optical robotic or GPS survey systems to collect applicable survey data. Our CAD packages and resurfacing modules are used to redesign the entire shape of the road, accessway or concrete bridge deck to full geometric survey criteria.
Resurfacing and restoration
We can establish all the parameters of the restoration work required: milling map, volume of asphalt needed, NAASRA/IRI targets, crossfall data and other requirements ahead of the remedial work taking place. This then allows for accurate surface cutting or asphalt laying to proceed based entirely on the data mapped.
Variable depth milling
If your company is involved in variable depth milling and you are in need of survey accuracy but not complexity, PaveSmart will be of interest to you. With the ability to control ‘thickness to be cut’ on both sides of the machine to survey grade accuracy, the PaveSmart grade control provides an affordable way of meeting contract level tolerances and smoothness requirements.
Synergy’s PaveSmart grade control system offers distinct advantages to the engineer and/or contractor on any project requiring variable depth milling. The unit adapts to any planer that has electric/hydraulic control, eliminates string line or complicated 3D setups, allows high accuracy milling to + 1/8 inch or 3mm, increases productivity, and is far less costly and risky to use in comparison to a conventional string-line or GPS control.
Simple set out
To illustrate, we can load a 10,000 foot/3,000 meter runway project into the PaveSmart system before two people can set up string line for milling a mere 200 foot/60 meter distance and/or establish a complicated 3D control system.
Experienced survey team
Survey cut depths are input to the system directly from either your job’s geometric design files via cut sheets collected by Synergy’s experienced ground survey team or from designs via the Synergy Road Scanning System or Synergy’s Pavement Design service.
Precise variable depth milling and paving survey
Together with Synergy’s patented PaveSmart grade control system, our teams are specialists in collecting accurate ground survey data used to create precise variable depth asphalt paving and milling levels.
Accurate material control
We do this by accurately surveying the initial surface to determine a grid and plotting out precise milling cuts or paving depths for each consecutive run that the milling machine or asphalt paver needs to make. So we’re automatically formulating a very precise picture of how much material will be required and an absolute picture of the required finished levels needed.
Synergy also specializes in all manner of engineering survey related tasks, including set-out for structures, roads and bridges, as constructed plans and drawings, line marking and reinstatement survey.
Differential compaction control
Synergy’s PaveSmart grade control system offers distinct advantages to the engineer and/or contractor on any project requiring variable depth paving. The unit adapts to any paver that has electric/hydraulic control, eliminates string line or complicated 3D setups, allows high accuracy paving to + 1/8 inch or 3mm, allows for differential compaction, increases productivity, and is far less costly and risky to use in comparison to a conventional string-line or GPS control.
To illustrate, we can load a 10,000 foot/3,000 meter runway project into the PaveSmart system before two people can setup string line for paving a mere 200 foot/60 meter distance and/or establish a complicated 3D control system.
Survey paving depths are input to the system directly from either your jobs geometric design files via cut sheets collected by Synergy’s experienced ground survey team or from design via the Synergy Road Scanning System or Synergy’s pavement design service.
Inertial survey profile system
The Synergy Survey-Profile system is both a DOT/NATA certified inertial profiler and high resolution mobile surveying system. The Survey-Profile system can simultaneously measure IRI (longitudinal profile), transverse profile and 2D/3D surface scans for land surveying and machine control applications. The survey side of the system has been end-user validated as more accurate than any commercial scanning system.
Optimized for smoothness
The resulting outputs feature open area or roadbed topographies with accurate cross-slopes and elevations approaching total stations accuracy (with control point merger). Use the data for road design (optimized for smoothness) and variable depth machine control.
2D and 3D scanning
This device does full 3D scanning and can be simultaneously (or separately) used for IRI testing and full lane transverse profiles (for rutting, lane edge change and more under AASHTO PP69-10 & 70-10). The surface survey data can be adjusted with a merge in of control points for very accurate 3D elevation content.
IRI with cross slope and cut fill
The system can also be used for 2D scanning for pavement rehabilitation work that does not involve paving to grade. Synergy’s software includes a Profile Design module for configuring slope and cut/fill parameters for a design output optimized for best IRI results. The data can be exported to machine control systems, including Synergy’s PaveSmart grade control system.
Manage your capital
Technology rental makes sense when you are conservatively managing use of your capital. It gives you the opportunity to expense the rental directly against any specific project without the additional burden of continued ownership. In this way you always have the best technology from the best suppliers without the risk of obsolescence. As an experienced partner, Synergy PaveSmart will give you all the support you need for success and you can be assured that we will have the best solution available.
There when you need us
We’re there when you need us, working alongside you as part of your project team, available for full project management, or on an adhoc advisory basis.
Our experienced survey consultancy teams provide complete control of any asphalt surfacing project, removing risk and smoothing the path to success.
Helping for 20 years
For over 20 years, we have been helping customers around the world bring accuracy and control to asphalt paving and milling projects. Our experience in North America, Australasia and Southeast Asia spans more than 1000 projects to date.
Over 300 airports
We’re extremely proud and grateful that PaveSmart has been included in over 300 airport projects – the true measure of trust when you’re working with critical asphalt level accuracy.
Synergy PaveSmart has helped clients all around the world reach the highest levels of accuracy and precision on a range of applications from roading and airport runways to bridge decks, shape corrections and sports fields.
Have a job in mind? Send the details through to us now for pricing.
© 2019 Synergy Pavesmart.
All Rights Reserved